A stained, dated, or chipped tub doesn’t always mean it’s time for a full bathroom remodel. US Pro Paint & Renovation provides bathtub refinishing services and tile refinishing across the South Shore, Greater Boston, and Cape Cod — restoring tubs, surrounds, and tile to a like-new finish for a fraction of full renovation cost. We also handle new tile installation and complete surface preparation when a refresh calls for more than a recoat.
By JR Reis, Owner & President · Last updated July 2026
Restoring worn, stained, or chipped tubs with an industrial epoxy primer and acrylic topcoat for a glossy, durable, like-new finish.
Refinishing shower and tub surround tile without the cost or mess of tearing it out and starting over.
Installing new tile for floors, walls, or backsplashes when refinishing isn't the right fit and a full tile replacement makes more sense.
Repairing chips and cracks, sanding, and prepping surfaces before refinishing or new tile installation — the step that determines how well the finish holds up.
Re-grouting and minor tile repair or replacement are available options as an add-on services when refinishing alone won't solve the underlying issue.
Tub and tile refinishing typically costs $300–$700 for a full set (tub, surround, and floor tiles), compared to $10,000–$30,000+ for a full bathroom remodel.
Primary Service Area (South Shore — closest to our Hingham headquarters): Hingham, Quincy, Weymouth, Braintree, Cohasset, Scituate, Norwell, Hanover, and Marshfield.
Secondary Service Area (Greater Boston & Cape Cod): Cambridge, Newton, Plymouth, Wellesley, Needham, Dedham, and towns across Cape Cod.
Tub and tile refinishing — it costs $300 to $700 versus $3,000 to $10,000+ for a full gut renovation. We apply an industrial epoxy primer and acrylic topcoat in a single visit, restoring your tub and tile to a like-new finish at a fraction of replacement cost.
Refinishing typically runs $300 to $700 for a full set — tub, surround, and floor tiles — compared to $10,000 to $30,000+ for a full bathroom remodel. It’s the most cost-effective option when fixtures are structurally sound but cosmetically worn.
A single tub typically costs less than a full set (tub, surround, and floor tiles), which runs $300 to $700 total. We’ll give you an exact number based on your tub’s condition and size.
It depends on the material and condition of your existing surfaces — porcelain, fiberglass, and acrylic tubs all refinish differently. We assess your specific tub and tile during a free estimate and recommend the approach that holds up best.
Professionally refinished surfaces last 10 to 15 years with proper care — avoiding abrasive cleaners and letting the surface fully cure before use.
We clean the surface to remove soap scum and contaminants, repair chips and cracks, sand for adhesion, mask surrounding areas, apply industrial epoxy primer, then finish with an acrylic topcoat resin. If tiles need re-grouting first, that’s available at $65/hour and completed before coating.
We require a minimum 16-hour cure time before any water exposure, and recommend waiting 24 to 48 hours before the first full shower for maximum durability.
Both — refinishing is the better choice when existing tile is structurally sound but cosmetically worn; new tile installation makes sense when the surface is too damaged to refinish or you want a different material or layout entirely.
Yes, refinishing work is backed by our 3-year workmanship guarantee.
Most projects are done in a single visit — a fraction of the cost and time of a full bathroom remodel, with an honest recommendation if your bathroom actually needs more than a refinish.
Get Your Free Estimate or call (617) 922-6305 to get started.
